Dell Vostro A100 Service Manual

Also see for Vostro A100: Setup and quick reference guide Quick reference manual

Contents

System Setup Options — Dell Vostro A180Halt On All Error; All, But Keyboard (All, But Keyboard by default)Advanced BIOS FeaturesCPU Configuration l Execute-Disable Bit — Disabled; Enabled (Enabled by default)l Hyper Threading Technology — Disabled; Enabled (Enabled by default)Quick Boot Allows BIOS to skip certain tests while bootingDisabled; Enabled (Enabled by default)Boot Up NumLock Off; On (On by default)Boot Device ConfigurationHard Disk Drives Specifies the boot device priority sequence from available hard drivesRemovable Drives Specifies the boot device priority sequence from available removable drivesCD/DVD Drives Specifies the boot device priority sequence from available CD/DVD drivesFirst Boot Device Specifies the boot sequence from the available devicesRemovable; CD/DVD; Hard Disk; Disabled (Removable by default)Second Boot Device Specifies the boot sequence from the available devicesRemovable, CD/DVD, Hard Disk, Disabled (Hard Disk by default)Third Boot Device Specifies the boot sequence from the available devicesRemovable; CD/DVD; Hard Disk; Disabled (CD/DVD by default)Boot Other Device Disabled; Enabled (Enabled by default)Boot Menu Security Disabled; Enabled (Disabled by default)Advanced Chipset FeaturesInitiate Graphic Adapter Select which graphics controller to use as the primary boot deviceIGD; PCI/IGD (PCI/IGD Slot by default)DVMT Mode Select Fixed Mode; DVMT Mode; Combo Mode (DVMT Mode by default)DVMT/FIXED Memory 64 MB; 128 MB; Maximum DVMT (128 MB by default)Integrated PeripheralsIDE Configuration SATA Controller — Disabled; Compatible; Enhanced (Enhanced by default)Onboard Configuration l Onboard Audio Controller — Enabled; Disabled (Enabled by default)l Onboard LAN Controller — Enabled; Disabled (Enabled by default)l Onboard LAN Boot ROM — Enabled; Disabled (Enabled by default)SuperIO Configuration Serial Port1 Address — Disabled; 3F8/IRQ4; 2F8/IRQ3; 3E8/IRQ4; 2E8/IRQ3 (Disable by default)USB Configuration l USB Controller — Enabled; Disabled (Enabled by default)l USB 2.0 Controller — Enabled; Disabled (Enabled by default)l Legacy USB support — Enabled; Disabled (Enabled by default)l USB Storage Device Support — Enabled; Disabled (Enabled by default)USB Controller Disabled; Enabled (Enabled by default)Onboard Audio Controller Disabled; Enabled (Enabled by default)Onboard LAN Controller Disabled; Enabled (Enabled by default)Power Management SetupACPI Suspend Type S1(POS); S3(STR) (S3(STR) by default)Restore on AC Power Loss Power Off; Power On; Last State (Power Off by default)Resume by LAN Disabled; Enabled (Enabled by default)Resume by RTC Disabled; Enabled (Enabled by default)Set Supervisor Password Allows you to set the supervisor passwordSet User Password Allows you to set user passwords when the supervisor password has been setNOTE: Depending on your computer and installed devices, the items listed in this section may not appear, or may not appear exactly as listed.System InfoBIOS Info Shows the BIOS version number and date informationService Tag Shows the service tag of the computerProcessor Type Shows the processor typeProcessor L2 Cache Shows the processor L2 cache sizeMemory Installed Indicates amount of installed memory, available memory, memory speed, channel mode (dual or single), and type of memory