Dell Vostro A840 Service Manual

Also see for PowerEdge 860: Install guide Installation instructions Information update Getting started Hardware owner's manual

Dell Vostro A840 Service Manual Manual pdf 15 page image

Display BezelRemoving the Display Bezel1. Remove the display assembly (see Display).2. Remove the four rubber bumpers from the top and mylar tapes from the bottom of the display bezel.3. Remove the six screws on the display bezel.4. Using your fingertips, carefully pry up the inside edge of the display bezel.5. Remove the display bezel.Replacing the Display Bezel1. Align the display bezel over the display panel, and gently snap into place.2. Replace and tighten the six screws.3. Replace the display assembly (see Replacing the Display Assembly).Display PanelNOTICE: The display bezel is extremely fragile. Be careful when removing it to prevent damaging the bezel.1 rubber bumper (4) 2 screw (6)3 display bezel 4 display panelCAUTION: Before working inside your computer, read the safety information that shipped with your computer. For additional safety bestpractices information, see the Regulatory Compliance Homepage at www.dell.com/regulatory_compliance.