Troubleshooting Your TV 37Picture is too dim or too bright Update the color settings in the OSD. Press Menu on theremote control and select Picture.The screen is not centered correctly 1 Update the size settings in the OSD. Press Menu onthe remote control and select Size.2 Reset the original factory defaults. Press Menu on theremote control, select Setup, and then select FactoryReset.Screen has one or more lines 1 Check the aspect ratio settings in the OSD. Press theMenu button on the remote control and select Size.For more information on using the OSD, see "Usingthe On-Screen Display" on page 25.2 Ensure the proper source is selected in the InputSource menu. See "Input Select Menu" on page 26 formore information.3 Try connecting a different device. Ensure that youproperly connect the cables and update the inputsource in the OSD.4 Update the size settings in the OSD. Press Menu onthe remote control and select Size.5 Reset the original factory defaults. Press Menu on theremote control, select Setup, and then select FactoryReset.The side panel buttons do not work Check the OSD to see if the buttons have been locked.Press Menu on your remote control, select Setup.If you are unable to use the remote control, press thevolume up and the channel up buttons on the side ofthe TV for 10 seconds to unlock the buttons.The picture is too small 1 Adjust the size settings. Press Menu on the remotecontrol, and select Size.2 This may be a problem with your device. See thedocumentation for the device.Problem Possible SolutionW2600e0.book Page 37 Wednesday, June 30, 2004 11:55 PM
