Dell W2606C Service Manual

Also see for W2606C: Owner's manual Setup guide

Dell W2606C Service Manual Manual pdf 23 page image

Dell W2606C223. Input/Output Specification3.1 Input Signal connectorThis procedure gives you instructions for installing and using the LCD TV display.Position the display on the desired operation and plug the power cord into a convenient AC outlet. Three-wire powercord must be shielded and is provided as a safety precaution as it connects the chassis and cabinet to the electricalconduct ground. If the AC outlet in your location does not have provisions for the grounded type plug, the installershould attach the proper adapter to ensure a safe ground potential.Connect the 15-pin D-SUB or 24-pin DVI color display shielded signal cable to your signal system device and lockboth screws on the connector to ensure firm grounding. The connector information is as follow:1611 1551015 - Pin Color Display Signal CablePIN NO. Description PIN NO. Description1 Red Video 9 No Pin!2 Green Video 10 Sync Ground3 Blue Video 11 Not Used4 Not Used 12 Serial Data for DDC5 Ground 13 H-Sync.6 Red Ground 14 V-Sync.7 Green Ground 15 Serial Clock for DDC8 Blue GroundApply power to the display by turning the power switch to the "ON" position and allow about ten seconds for Panelwarm-up. The Power-On indicator lights "GREEN" when the display is on.With proper signals feed to the display, a pattern or data should appear on the screen, adjust the brightness andcontrast to the most pleasing display, or press auto-adjust to get the best picture-quality.This TV (with PC function) has power saving function following the VESA DPMS. Be sure to connect the signalcable to the PC.If your TV requires service, it must be returned with the power cord.