50 Chapter 4Advanced Details on Configuring ICA and RDP ConnectionsUse the following information when configuring ICA and RDP connections (thisinformation assumes that the thin client does not have a locked down privilege level):• High-privileged user - The additional functionality provided by the ConnectionSettings dialog box allows testing of connection definitions before they are entered(by a network administrator) into the user profile files.• Low-privileged user - The settings for the selected connection can be viewed butcannot be edited, and new connections cannot be defined. Connection definitionsare controlled by a network administrator and are accessed by the thin client fromthe user profiles located on a remote server.• Stand-alone user - The Connect Manager is available to Stand-alone users becauseconnection definitions cannot be accessed from remote user profiles. If user profilesare available on an FTP server but are not accessed because DHCP is not availableor is not configured to provide the file server IP address, the file server IP locationcan be entered manually using the Network Setup dialog box.Configuring ICA ConnectionsTo configure the ICA connection option you selected in the Remote Connectionsdialog box (see "Remote Connections"), use the following guidelines.If you select the Server option, the Host Names box is displayed.If you select the Published Application option, the Application Name box replaces theHost Names box.
