Dell Wyse Z90D7 Installation Manual

Also see for Wyse Z90D7: Installation guide Quick start guide Quick start guide Quick start guide Quick start guide

Contents

3 Installing WES7p FirmwareThis chapter includes the requirements and procedures you need to install and useWyse USB Firmware Tool to update your thin client to WES7p firmware.TIP: The purpose of the USB Firmware Tool is to configure a bootable USB key fordevice firmware. In the following procedures, you will create a configured USB keycontaining the firmware contents that you need, and then boot from this configuredUSB key on appropriate product and flash size devices to push the contents of the USBkey onto these target devices.EXTREEMLY IMPORTANT: You must perform the steps to create and use theconfigured USB key on each thin client as noted. You cannot completely convert onethin client and then use the USB Firmware Tool to pull and push that image to yourother thin clients.Requirements• Machine with a minimum of 16 GB of free space running either of the following:· Windows Server 2008 R2 SP1· Windows 7 Enterprise (32-bit and 64-bit)· Windows 7 Ultimate (32-bit and 64-bit)• USB Key:· USB 2.0 only· USB key size should be 16 GB (see also "USB Keys - Troubleshooting Boot Issues")CAUTION: During the USB key configuration process the USB keys will bereformatted.