Dell XPS 13 Manual

Also see for XPS 13: Setup and specifications Service manual Service manual Owner's manual Quick start guide

2 Press F2 when the Dell logo is displayed on the screen to enter the BIOS setupprogram.The BIOS setup program is displayed.3 On the left pane, select Security → TPM Security → Clear TPM.4 Select or clear any of the following options to enable or disable it, respectively:– Enabled (Default): The BIOS enables the TPM during POST and it can beaccessed by the operating system.– Disabled: The BIOS will not enable the TPM during POST and it cannot beaccessed by the operating system.– TPM On: The TPM is enabled and activated.– Clear: The BIOS clears the information stored in the TPM.5 Save the settings and exit.10