Wireless Mini-Card 25CAUTION: When the Mini-Card is not in the computer, store it in protectiveantistatic packaging. For more information, see "Protecting Against ElectrostaticDischarge" in the safety information that shipped with your computer.Replacing the Mini-Card1 Remove the new Mini-Card from its packaging.2 Align the notch on the Mini-Card with the tab in the system-boardconnector.CAUTION: Use firm and even pressure to slide the Mini-Card into place. If youuse excessive force, you may damage the connector.CAUTION: The connectors are keyed to ensure correct insertion. If you feelresistance, check the connectors on the Mini-Card and on the system board, andrealign the Mini-Card.CAUTION: To avoid damage to the Mini-Card, never place cables under theMini-Card.1 screw 2 Mini-Card3 system-board connector231Spyder_OM_Book.book Page 25 Monday, January 16, 2012 11:02 AM