Removing the display assemblyWARNING: Before working inside your computer, read the safetyinformation that shipped with your computer and follow the steps in Beforeworking inside your computer. After working inside your computer, followthe instructions in After working inside your computer. For more safety bestpractices, see the Regulatory Compliance home page at www.dell.com/regulatory_compliance.Prerequisites1 Remove the base cover.2 Remove the battery.3 Disconnect the wireless card.Procedure1 Peel off the tape that secures the display cable to the hard-disk plate.2 Remove the two screws (M1.6x2.5) securing the display cable bracket to thesystem board3 Lift the display cable bracket off the display cable.4 Using the pull tab, disconnect the display cable from the system board.5 Disconnect the touch-screen cable from the system board.34
