Identifier GUID-C3E89978-1994-4C7D-98C9-E51C8651B0A6Status ReleasedReplacing the fansWARNING: Before working inside your computer, read the safetyinformation that shipped with your computer and follow the steps in Beforeworking inside your computer. After working inside your computer, followthe instructions in After working inside your computer. For more safety bestpractices, see the Regulatory Compliance home page at www.dell.com/regulatory_compliance.Identifier GUID-396D4ADD-FAAE-4C35-AEEF-CB3FC39F26B0Status ReleasedProcedure1 Align the screw holes on the processor fan (JFAN_1) with the screw holes on thepalm-rest assembly.2 Connect the processor fan (JFAN_1) cable to the system board.3 Route the display cable through the routing guides on the processor fan(JFAN_1).4 Replace the two screws (M2x4) that secure the processor fan (JFAN_1) to thesystem board.5 Align the screw holes on the video fan (JFAN_2) with the screw holes on thepalm-rest assembly.6 Connect the video fan (JFAN_2) cable to the system board.7 Route the touch-screen cable through the routing guides on the video fan(JFAN_2).8 Adhere the tape that secures the touch-screen cable to the video fan (JFAN_2).9 Connect the display cable to the system board.10 Replace the two screws (M2x4) that secure the video fan (JFAN_2) to thesystem board.51
