Removing and Installing Parts 85Media Card ReaderFor information about using the Media Card Reader, see "Using a Media Card Reader (Optional)" onpage 18.CAUTION: Before you begin any of the procedures in this section, follow the safety instructions located in theProduct Information Guide.NOTICE: To prevent static damage to components inside your computer, discharge static electricity from yourbody before you touch any of your computer’s electronic components. You can do so by touching an unpaintedmetal surface on the computer chassis.Removing a Media Card Reader1 Follow the procedures in "Before You Begin" on page 61.2 Remove the CD/DVD drive (see "Removing a CD/DVD Drive" on page 81).3 Remove the hard drive (see "Removing a Hard Drive" on page 76).4 Disconnect the interface cable from the back of the Media Card Reader and from the Media CardReader connector on the system board (see "System Board Components" on page 65).1 interface cable 2 Media Card Reader connector12
