86 Replacing the System BoardCAUTION: The system board and metal tray are connected and are removed asone piece.7 Carefully, lift the system board assembly up and out of the computer.CAUTION: If you are replacing the system board, visually compare thereplacement system board to the existing system board to make sure that you havethe correct part.NOTE: Some components and connectors on replacement system boards may bein different locations than corresponding connectors on the existing system board.NOTE: Jumper settings on replacement system boards are preset by the factory.8 Transfer components from the existing system board to the replacementsystem board, if applicable.1 screws (2) 2 system board3 metal tray 4 tabs1423
