GUID-B08D3BE1-06A2-474C-91E5-6ED1A5525146Replacing the full-lengthgraphics cardsWARNING: Before working inside your computer, read the safetyinformation that shipped with your computer and follow the steps in Beforeworking inside your computer. After working inside your computer, followthe instructions in After working inside your computer. For more safety bestpractices, see the Regulatory Compliance home page at www.dell.com/regulatory_compliance.GUID-95BD54D7-64A0-4689-9E41-4EA0B98930C8Procedure1 Align the full-length graphics card with the slot on the system board.2 Place the card into the slot and press down firmly until the full-length graphicscard snaps into place.3 Connect the power cables to the full-length graphics card.4 Slide the tab on the graphics-card bracket into the slot on the chassis and snap itinto place.GUID-2267DD85-6888-4EFD-A633-20D9C0C6CBA1Post-requisites1 Follow the procedure from step 9 to step 10 in “Replacing the power-supplyunit”.2 Replace the right-side cover.73