• Access System Setup by pressing F2 key• Bring up the one-time boot menu by pressing F12 keyThe one-time boot menu displays the devices that you can boot from including the diagnostic option. The boot menu options are:• Removable Drive (if available)• STXXXX DriveNOTE: XXX denotes the SATA drive number.• Optical Drive (if available)• SATA Hard Drive (if available)• DiagnosticsNOTE: Choosing Diagnostics, will display the ePSA diagnostics screen.The boot sequence screen also displays the option to access the System Setup screen.System setup optionsNOTE: Depending on this computer and its installed devices, the items listed in this section may or may not appear.Table 4. System setup options—System information menuGeneral-System InformationSystem InformationBIOS Version Displays the BIOS version number.Service Tag Displays the Service Tag of the computer.Asset Tag Displays the Asset Tag of the computer.Ownership Tag Displays the ownership tag of the computer.Manufacture Date Displays the manufacture date of the computer.Ownership Date Displays the ownership date of the computer.Express Service Code Displays the express service code of the computer.Memory InformationMemory Installed Displays the total computer memory installed.Memory Available Displays the total computer memory available.Memory Speed Displays the memory speed.Memory Channel Mode Displays single or dual channel mode.Memory Technology Displays the technology used for the memory.DIMM A Size Displays the DIMM A memory size.DIMM B Size Displays the DIMM B memory size.Processor InformationProcessor Type Displays the processor type.Core Count Displays the number of cores on the processor.Processor ID Displays the processor identification code.Current Clock Speed Displays the current processor clock speed.Minimum Clock Speed Displays the minimum processor clock speed.Maximum Clock Speed Displays the maximum processor clock speed.56 System setup