Audio Board 4711Audio BoardWARNING: Before working inside your computer, read the safety informationthat shipped with your computer. For additional safety best practices information,see the Regulatory Compliance Homepage atwww.dell.com/regulatory_compliance.CAUTION: Only a certified service technician should perform repairs on yourcomputer. Damage due to servicing that is not authorized by Dell™ is not coveredby your warranty.CAUTION: To avoid electrostatic discharge, ground yourself by using a wristgrounding strap or by periodically touching an unpainted metal surface (such as aconnector on your computer).CAUTION: To help prevent damage to the system board, remove the main battery(see "Removing the Battery" on page 17) before working inside the computer.Removing the Audio Board1 Follow the instructions in "Before You Begin" on page 9.2 Remove the base cover (see "Removing the Base Cover" on page 13).3 Remove the battery (see "Removing the Battery" on page 17).4 Lift the connector latch and disconnect the audio-board cable from theconnector on the system board.5 Disconnect the speaker cable from the connector on the audio board.6 Remove the two screws that secure the audio board to the palm-restassembly.7 Lift the audio board out of the computer.