Memory Module and Modem: Dell™ XPS M140 Service Manualfile:///C|/Users/santhosh_v.ASIA-PACIFIC/Desktop/Hawke/New%20folder/upgrades.htm[2/21/2014 11:33:45 AM]As the computer boots, it detects the installed memory. The system configuration information remains the same.If You Are Adding or Upgrading MemoryAs the computer boots, it detects the change in memory and automatically updates the system configurationinformation.Confirming Installed MemoryTo confirm the amount of memory installed in the computer, use one of the following methods:Click the Start button, then click Help and Support. Under Pick a task, click Use Tools to view yourcomputer information and diagnose problems. Under Tools, click My Computer Information, then clickFind information about the hardware installed on this computer.Access the System Setup Program at startup by pressing immediately when the DELL logo appears. If youwait too long and the Microsoft® Windows® logo appears, continue to wait until you see the Windows desktop,then shut down your computer and try again. See "Using the System Setup Program" in your User's Guide.ModemNOTE: If you ordered the optional modem at the same time that you ordered your computer, the modem isalready installed.Removing the ModemCAUTION: Before you perform any of the procedures in this section, follow the safety instructions in theProduct Information Guide.NOTICE: To avoid electrostatic discharge, ground yourself by using a wrist grounding strap or by periodicallytouching an unpainted metal surface (such as the back panel) on the computer.1. Follow the instructions in Preparing to Work Inside the Computer.2. Loosen the two captive screws on the modem/Mini PCI/wireless cover, then remove the cover and set it aside.