Dell XPS One 24 Service Manual

Also see for XPS One 24: User guide Setup guide User guide User guide

Replacing the Processor 3710Replacing the ProcessorCAUTION: Before working inside your computer, read the safety information thatshipped with your computer. For additional safety best practices information, seethe Regulatory Compliance Homepage at www.dell.com/regulatory_compliance.NOTICE: Do not perform the following steps unless you are familiar with hardwareremoval and replacement. Performing these steps incorrectly could damage yoursystem board. For technical service information, see the Setup Guide.1 Follow the procedures in "Before You Begin" on page 9.2 Remove the computer cover (see "Replacing the Computer Cover" onpage 11).3 Remove the top shield (see "Replacing the Top Shield" on page 15).CAUTION: The heat sink assembly may be very hot during normal operation. Besure that it has had sufficient time to cool before you touch it.4 Remove the processor heat sink assembly (see "Replacing the ProcessorHeat Sink Assembly" on page 33).NOTE: Unless a new heat sink assembly is required for the new processor,reuse the original heat sink assembly when you replace the processor.5 Press and push the release lever down and out to release it from the tabthat secures it.6 Open the processor cover.