Dell Z9100-ON Installation Manual

Also see for Z9100-ON: Deployment guide Installation guide Installation guide

Contents

Figure 13. Z9100–ON Fan Modules1. Fan ModulesInstalling a Fan ModuleThe fan modules in the Z9100–ON are field replaceable.Module slot 1 is on the left side of the chassis, module slot 2 is in the middle of the chassis, and moduleslot 3 is on the right side of the chassis.CAUTION: DO NOT mix airflow directions. All fans must use the same airflow direction (reverse ornormal). If you mix the airflow direction, the switch detects the discrepancy, issues an alarm, andmay auto-shutdown to avoid heat damage to components. You must correct the mixed airflowdirection.To install a fan module, follow these steps.1. Take the fan module out of the shipping box.2. Slide the module into the bay.Figure 14. Installing the PSU and Fan• Power supply unit on the right• Fan unit on the left28 Fans