For the Inspiron 1570, remove six screws on the palm rest.14. Starting with the right side of the palm rest, carefully pull up to disengage the tabs on the palm rest from the computer base.Replacing the Palm Rest1. Align the palm rest on the computer base and gently snap the palm rest into place.2. Replace the screws on the palm rest.3. Connect the touch pad cable and the power button cable to the system board.4. Route the Mini-Card antenna cables and display cable through their routing guides.5. Thread the Mini-Card antenna cables through the slot in the computer base.6. Connect the display cable and replace the screw.7. Replace the keyboard (see Replacing the Keyboard).8. Replace the power button cover (see Replacing the Power Button Cover).9. Replace the screws on the bottom of the computer.10. Replace the WWAN/FCM cover on the Inspiron 1470.11. Replace the Mini-Card (see Replacing the Mini-Card).12. Replace the module cover (see Replacing the Module Cover).13. Replace the optical drive (see Replacing the Optical Drive).CAUTION: Carefully separate the palm rest from the computer base to avoid damage to the palm rest.