Delo DELOLUXcontrol User Manual
                                  | |
Contents
| 
15Design and function4 Design and functionDELOLUXcontrol, in combination with the corresponding detector heads, serves tomeasure and control the intensity of the polymerization-effective radiation of a curinglamp. The detector heads are subject to calibration. Comply with the manufacturer’sinstructions and operating instructions of the lamps to be measured/controlled underany circumstances.In combination with different detector heads, the intensity at the required working positioncan be measured. Alternatively, the intensity at the light guide outlet or the lamp head canbe detected. In order to measure the intensity directly at the light guide outlet or the lamphead of a DELOLUX lamp, an adapter (aperture) must be screwed on / attached forcentering.Application areas:Sensor Wavelength range in combination withUVA sensor 315 – 395 nm* DELOLUX 03 SDELOLUX 04 (with adapter if required)DELOLUX 06BLUE sensor 390 – 480 nm* DELOLUX 03 SDELOLUX 04 (with adapter if required)DELOLUX 069 mm LED sensor 365 / 400 / 460 nm DELOLUX 20DELOLUX 202DELOLUX 22DELOLUX 80 (with adapter if required)1 mm LED sensor 365 / 400 / 460 nm DELOLUX 50 (with adapter if required)* The calibration standard is a Hg bulb. The reference basis is the spectrum of DELOLUX 03 S and DELOLUX 04 |
This manual is suitable for:
manualsdatabase
Your AI-powered manual search engine