Owner´s Manual DEA600 Radio46 | P a g eThe “Wireless & Networks” menu is accessed while the System is ON.Once the “Wireless & Networks” settings menu is open the next connectivityoptions list is presented to the user following the next hierarchy, see Figure89 as reference:• Wi-Fi• BluetoothFigure 89: The Wireless & Networks settings screenThe Bluetooth & Wi-Fi activation options are presented to the user as slidercontrols.Each slide control has two states:• On: slide action to the right• Off: slide action to the leftIn the case the system detects an On state the corresponding wirelessoption is activated.In the case the system detects an Off state the corresponding wirelessoption is deactivated.Wi-FiIn the case the Wi-Fi option is activated a separate sub screen displays thelist of available networks. The WPS activation soft key is present as part ofthe Wi-Fi interface. The listed items in the available network list work as softkeys.A password to enable the connection might be required if the network is alimited access network. In the case a password is required a pop-up subscreen along with a virtual keyboard is displayed illustrated in Figure 90.Figure 90: The Wi-Fi menu screen Part I.The system captures the introduced password. The system uses thecaptured password for the network connection process.The system displays a pop-up message for 3 seconds in case the capturedpassword is incorrect. See Figure 91 as reference.Wi-FiATTWIFIIn RangeVerizonNot in RangeGuestSecure with WPA/WPA2DELPHI SecureNot in Range