Delphi DEA600 Owner's Manual

Also see for DEA600: Owner's manual

Delphi DEA600 Owner's Manual Manual pdf 18 page image

Owner´s Manual DEA600 Radio18 | P a g e3. Radio will start playing the USB and shows the track number, Song,Artist, elapsed time, and album information when available.4. If the iPod is an unsupported model, it can still be listened to in thevehicle by connecting to the auxiliary input jack using a standard3.5 mm (1/8 in) stereo cable.5. To control and browse the selected media source refer to sectionsMedia Sources and Media Audio Control Soft key for furtherinformation.Expected behavior when iPod is connected: The iPod battery recharges automatically while the vehicle is on. The iPod shuts off and stops charging when the vehicle is shut off.Error MessagesIf an “UNSUPPORTED” message is displayed, it could be for one of thefollowing reasons: When the iPod connected is not supported. The iPod does not respond to the radio commands, in this casereset the iPod and try again the connection.If a “NO MUSIC” message is displayed, it could be because there are noplayable files in the iPod.CD PlayerThe player can be used for CD and MP3 audio.With the vehicle on, insert a disc into the slot, label side up, the player pulls itin and begins playing.The system is capable of playing: Most audio CDs CD-R or CD-RW with MP3 filesWhen playing any compatible recordable disc, the sound quality can bereduced due to disc quality, the method of recording, the quality of the musicthat has been recorded, or the way the disc has been handled.There can be increased skipping, difficulty in recording tracks, difficulty infinding tracks, and/or difficulty in loading and ejecting.If these problems occur, check the disc for damage or try a known gooddisc.To avoid damage to the CD player: Do not use scratched or damaged discs. Do not apply labels to discs. (The labels could get caught in theplayer). Insert only one disc at a time. Keep the loading slot free of foreign materials, liquids, and debris. Use a marking pen to label the top of the disc.To load a disc:1. Turn the vehicle on.2. Insert a disc into the slot, label side up. The player pulls it in therest of the way. If the disc is damaged or improperly loaded, thereis an error on the screen and the disc ejects.3. Press “Eject” to eject a disc from the CD player. If the disc is notremoved within a short period of time, it is automatically pulled backinto the player.Playing an Audio CD:1. After the CD is inserted, the mode is changed to CD mode, unlessany mode with a higher priority is active (I.E. phone call, video,reverse mute….).2. To control and browse the selected media source refer to sectionsMedia Sources and Media Audio Control Soft key for furtherinformation.Error MessagesIf a “Disc Error” message is displayed and/or the disc comes out, it could befor one of the following reasons: The disc has an invalid or unknown format. The disc is very hot. Try the disc again when the temperaturereturns to normal. The road is very rough. Try the disc again when the road issmoother. The disc is bent. The disc is dirty, scratched, wet, or upside down. The air is very humid. Try the disc again later.