5SAFETY FIRSTRead and understand all operating instructions before operating your kiln.SAFETY PRECAUTIONS: Kilns are as safe as any other electrical appliance whenused under normal and proper operating conditions. All safety precautions throughoutthis manual should be observed.o Use common sense while installing and using this kiln.o Do not install kiln closer than 12" from any surface, or closer than 18” from acombustible surface. Remove all potentially combustible materials from the kilnareao Make sure all electrical specifications are followed. Use correct voltage, wiresize and circuit breaker. Make sure all connections are tight. Avoid usingaluminum wire. Always use the proper grounded receptacle. A qualifiedelectrician or service person should be used for all electrical service or repairs.o Install in covered, walled in, well-ventilated area. Do not allow your kiln to getwet. Fumes from the ware should be vented to the outside. Never use your kilnoutside! Avoid moisture.o Always keep children and unsupervised personnel away. Surface will get hot anda burn could result.o Fire glass only to the manufacturers recommended firing temperature. Improperfire temperatures could result in damage to your kiln. Do not operate kiln over themaximum temperature rating of 1700oF.o Replace any worn or defective parts with ONLY genuine Jen-Ken Kilnreplacement parts.o Unplug the kiln before servicing or vacuuming.o Do not drop or slam the lid shut.o Let the kiln cool to room temperature before opening the lid.o NOTE: If you are in doubt about anything, call Delphi Glass 800.248.2048 orJen-Ken Kilns during regular business hours at 800.329.KILN.