Delphi Roady SA10035 User Manual

Also see for Roady SA10035: User guide Quick guide

Contents

Delphi Roady SA10035 User Manual Manual pdf 10 page image

Basic OperationsTurning Roady On and OffPress on the Roady Receiver. When first turned on, the receiver willautomatically tune in to the last channel listened to and recall the previoussettings.Basic Channel SelectionSelect a channel by number1. Verify that Roady is in Direct Entry mode. “Direct” should appear in theupper right corner of the display. If A, B, or C appears, press until thedisplay says “Direct.”2. Enter channel number using the number keys, i.e., 5 + 0 for Channel 50.Set/select channel presetsYour Roady Receiver can store up to 30 preset channels. They are organizedinto three different groups (Preset A, Preset B, and Preset C), each with 10channels corresponding to the 10 number keys. For preset 10, you onlyneed to press “0.”Selecting channel presetsPress until an A, B, or C appears in the upper right corner of thedisplay. Press the number key corresponding to the desired preset.Setting channel presets1. Tune in the channel you want to register as a preset, making sure it is playing.2. Select either Preset A, Preset B, or Preset C by pressing until an A,B, or C appears in the upper right corner of the display.S e c t i o n 3preset/directpreset/directpreset/direct10