Delsys Incorporated Trigno PM-W02 User Manual
                                      | |
Contents
| 
TrignoTM Personal Monitor User’s Guide25Advanced FeaturesSensor ConsoleThe sensor status can be viewed anytime, even if a protocol is not cur-rently running. From the home screen, select the “Sensors” buttonto display the Sensor Console. The screen shows sensor charge sta-tus, channel number, sensor type, network status and wireless signalstrength. Sensors can be turned off from this screen. Use the scrollarrows to navigate the display as needed.Figure 24: Displaying the Sensor Console.Managing Data Files (Main Menu)Viewing Data FilesData files can be listed by selecting the “Menu” button on the homescreen and then selecting “View Data Files”. A listing of the all thestored data files on the device will be available. These files are gener-ated by a corresponding Test file and synchronized in EMGworks.Files can be deleted to free memory on the Personal Monitor eitherthrough EMGworks or by selecting the “Delete” command(softkey 1)on the device itself. The amount of free memory is displayed at thetop of the screen.When first launching the data files screen, the files on the device mustbe indexed. This process takes a few minutes (proportional to thenumber of data files on the device). To abort the indexing process andreturn to the main menu, press softkey 3. |
This manual is suitable for:
manualsdatabase
Your AI-powered manual search engine