18PARTS, SERVICE OR WARRANTY ASSISTANCEAll Delta Machines and accessories are manufactured to high quality standards and are serviced by a networkof Porter-Cable • Delta Factory Service Centers and Delta Authorized Service Stations. To obtain additionalinformation regarding your Delta quality product or to obtain parts, service, warranty assistance, or the locationof the nearest service outlet, please call 1-800-223-7278 (In Canada call 1-800-463-3582).A complete line of accessories is available from your Delta Supplier, Porter-Cable • Delta Factory Service Centers,and Delta Authorized Service Stations. Please visit our Web Site www.deltamachinery.com for a catalog orfor the name of your nearest supplier.Since accessories other than those offered by Delta have not been testedwith this product, use of such accessories could be hazardous. For safest operation, onlyDelta recommended accessories should be used with this product.ACCESSORIESSERVICEKEEP MACHINE CLEANPeriodically blow out all air passages with dry compressedair. All plastic parts should be cleaned with a soft dampcloth. NEVER use solvents to clean plastic parts. They couldpossibly dissolve or otherwise damage the material.Wear ANSI Z87.1 safety glasses whileusing compressed air.FAILURE TO STARTShould your machine fail to start, check to make sure theprongs on the cord plug are making good contact in theoutlet. Also, check for blown fuses or open circuit breakersin the line.LUBRICATIONApply household floor paste wax to the machine table andextension table or other work surface weekly.PROTECTING CAST IRON FROM RUSTTo clean and protect cast iron tables from rust, you willneed the following materials: 1 pushblock from a jointer,1 sheet of medium Scotch-Brite™ Blending Hand Pad, 1can of WD-40®, 1 can of degreaser, 1 can of TopCote®Aerosol. Apply the WD-40 and polish the table surfacewith the Scotch-Brite pad using the pushblock as aholddown. Degrease the table, then apply the TopCote®accordingly.