Delta DVP02DA-E2 Instruction Sheet

Also see for DVP02DA-E2: Instruction sheet

- 3 -Digital/Analog module (02D/A & 04D/A)Max. rated powerconsumption 02DA: 1.5W, 04DA: 3W, supply by external power source.Connector European standard removable terminal block (Pin pitch: 5mm)ProtectionVoltage output is protected by short circuit. Short circuit lasting fortoo long may cause damage on internal circuits. Current output canbe open circuit.Operation/storagetemperatureOperation: 0°C~55°C (temperature), 5~95% (humidity), Pollutiondegree2Storage: -25°C~70°C (temperature), 5~95% (humidity)Vibration/shockimmunityInternational standards: IEC61131-2, IEC 68-2-6 (TEST Fc)/IEC61131-2 & IEC 68-2-27 (TEST Ea)Series connection toDVP-PLC MPUThe modules are numbered from 0 to 7 automatically by theirdistance from MPU. Max. 8 modules are allowed to connect to MPUand will not occupy any digital I/O points. Functions SpecificationsDigital/Analog module Voltage output Current outputRange of analog output -10V ~ 10V 0 ~ 20mA 4mA ~ 20mARange of digitalconversion -32,000 ~ +32,000 0 ~ +32,000 0 ~ +32,000Max./Min. range ofdigital data -32,768 ~ +32,767 0 ~ +32,767 -6,400 ~ +32,767Hardware Resolution 14 bits 14 bits 14 bitsMax. output current 5mA －Tolerance loadimpedance 1KΩ ~ 2MΩ 0 ~ 500ΩAnalog output channel 2 channels or 4 channels / each moduleOutput impedance 0.5Ω or lowerOverall accuracy 0.5% when in full scale (25°C, 77°F)1% when in full scale within the range of 0 ~ 55°C (32 ~ 131°F)Response time 400μs / each channelDigital data format 2’s complement of 16 bitsIsolation methodOptical coupler isolation between analog circuits and digital circuits.No isolation among analog channels.500VDC between digital circuits and Ground500VDC between analog circuits and Ground500VDC between analog circuits and digital circuits500VDC between 24VDC and Ground Control RegisterCR# Attrib. Register name Explanation#0 O R Model nameSet up by the system, model code:DVP02DA-E2 = H’0041; DVP04DA-E2 =H’0081#1 O R Firmware version Display the current firmware version in hex.#2 O R/W CH1 output mode setting Output mode: Default = H’0000.Take CH1 for example: