- -184.2.2 AutoPowerOff– AutoPowerOff ModeThe Auto switch off item controls the instrument’s automatic turning off during logging, betweenthe capture of a sample and the next one. When the interval is lower than 5 minutes, theinstrument will always remain on. With intervals greater than or equal to 5 minutes, it is possibleto turn off the instrument between loggings: it will turn on one minute before sampling and will turnoff immediately afterwards, thus increasing the battery life.Once you have accessed the LOGGING submenu (previous paragraph) use the arrows ▲▼ toselect Auto switch off. During configuration, the following is displayed:• If the set Log Interval (see previous par.) is lower than 5 minutes, the following will bedisplayedLOGGING MENUAUTO SWITCH OFFLogging frequencysetted < 5 min.During log sessionthe instrumentwill shut ONbetween two samples exit/cancelIf the set Log Interval (see previous par.) is greater or equal to 5 minutes, the following will bedisplayed during configuration:LOGGING MENUAUTOPOWEROFFLogging frequencysetted >= 5 min.During log sessionthe instrumentwill shut OFFbetween two samples▲▼ set exit/cancel1. By using the arrows ▲▼ you can select:ON (the instrument stays on)OFF (the instrument stays off)2. Press ESC to return to the Logging menu;3. Press ESC again to return to the main menu;4. Press MENU to exit immediately from the menu.