Delta STEAMSCAPE 5CH-250 Series Instructions Manual

2113376 Rev. EControl Features1. Temperature Display: The digital readout displays the ambient temperature, set point and cycle time, system status, and diagnostic error codes.2. Steam Icon: When illuminated the steam cycle is running.3. Water Icon: This is also illuminated during a steam bath cycle, to indicate water is boiling inside the steam generator.4. Menu Button: Used to change cycle time, and switch between ºF and ºC. When steam is off, pressing this button will toggle between these set-tings. The settings are changed with the up/down arrow buttons.5. Stop Button: Pressing this button will stop the current steam cycle or menu mode.6. User 1 Button: Starts the user one cycle and is the up arrow when changing Menu settings. Pressing this button while in a cycle will change thetemperature and remaining time left on that cycle.7. User 2 Button: Starts the user two cycle and is the down arrow when changing Menu settings. Pressing this button while in a cycle will changethe temperature and remaining time left on that cycle.IMPORTANT: This control must be installed inside the steam room for proper operation of the system and will ONLY function with 5GE-SMP seriesgenerators.Cleaning instructions: use a damp cloth and mild soap. Do NOT use abrasive cleaners which might scratch the surface or the base of the control.41326575CH-250 and 5CH-550 Series Controls