Delta-T SM150T User Manual
Also see for SM150T: Quick start guide
                                                         | |
Contents
| 
SM150T User Manual 1.0 Operation 13HH2 MeterThis assumes you have version 2.8 or later for both the PCsoftware HH2Read and the HH2 firmware (see foot of page). Connect the SM150T to the HH2 meter. Press Esc to turn the meter on, and if necessary pressagain until the HH2 displays the start-up screen. Set the meter to read from an SM150T:► Press Set and scroll down to the Device option.► Press Set again and scroll down to selectSM150T.► Press Set to confirm this choice. Make sure the HH2 is correctly configured for your soil type:► At the start-up screen, press Set and scroll down to the Soil Type option.► Press Set again and scroll down to theappropriate soil type (use Mineral for sand,silt or clay soils or Organic for peaty soils)► Press Set to confirm this choice. Choose the units in which you want to display the readings.► At the start-up screen, press Set and scroll down to the Display option.► Press Set again and scroll down to select units.► Press Set to confirm this choice. Press Read to take a reading. Press Store to save or Esc to discard the reading. Remove the SM150T from the soil and move to a new location... If you have saved data, connect your HH2 to a PC and runHH2Read to retrieve the readings.For an upgrade contact Delta-T.See also: HH2 User Manual v4.2 or laterNote: The HH2 does not read temperatureDevice: SM150TSoil Type: MineralSM150T Store?20.3 %vol |
Related manuals for Delta-T SM150T
This manual is suitable for:
manualsdatabase
Your AI-powered manual search engine