Deltatherm LT 5 Series Assembly Instructions Manual
                                              | |
4Operating manual for LT series cooling water heat exchangerAlong with the general safety information listed in the following, you will find furthersafety information in this operating manual under the main points as well as in thesection "In case of emergency". The directives and standards not named here alsoretain their validity.This operating manual contains basic information to be followed during setup, operationand maintenance. Therefore, the operating manual is to be read by the assembler andoperator before the assembly and commissioning and should be constantly available onthe site of operation of the machine/installation.Persons who are not familiar with this operating manual as well as children andadolescents below age 16 may not use the device and should be kept away from theconnected device.The working area is to be locked off in accordance with the task and should correspondto the local directives on work protection.Use personal safety equipment such as safety shoes, rubber gloves, protective gogglesand a helmet.Ensure that all evacuation routes from the work area are unobstructed.In order to prevent asphyxiation and poisoning, a sufficient oxygen supply to theworkplace is to be ensured and the absence of poisonous gases should be verified.If work is to be performed with welding equipment or electrical tools, ensure that thereis no danger of explosion.All safety and protective installations are to be mounted and started up immediatelyafter the end of works.The operator is responsible for third parties in the working area.We draw your attention to the fact that according to product liability regulations, we arenot responsible for damages caused by our device in the case where information anddirectives from this operating manual are not respected. The same regulations apply foraccessories. |
This manual is suitable for:
manualsdatabase
Your AI-powered manual search engine