Deltech Fitness DF1175 Assembly Instructions Manual

Contents

box contents

NOTE: DO NOT USE THIS SET OF ROLLER PADSWHEN USING THIS ATTACHMENT WITH THEDF102 BENCHASSEMBLE THE LEG EXTENSION FRAME (1) TO THE YOKE POST (2) USING THE ½” x 3 ¼” BOLT (5)AND THE ½” NUT (6).SLIDE THE ROLLER PAD TUBES (4) THROUGH THE LEG EXTENSION FRAME (1) AND THE YOKEPOST (2). NEXT SLIDE THE ROLLER PADS (3) ONTO THE ROLLER PAD TUBES (4). THEN SECURETHE ROLLER PADS (3) USING THE MUSHROOM CAP (9).INSTALL THE 1 ¾” SQUARE CAPS (8) INTO THE LEG EXTENSION FRAME (1) AND THE YOKE POST(2). INSTALL THE 1” ROUND CAP (7) INTO THE LEG EXTENSION FRAME (1).FINALLY INSTALL THE BUMPER (10) ON THE BACK OF THE LEG EXTENSION FRAME (1).MAKE SURE ALL THE BOLTS ARE TIGHT BEFORE USE. REMEMBER TO CHECK THEMPERIODICALLY TO MAKE SURE THEY ALWAYS STAY TIGHT.

/ 6

Related manuals for Deltech Fitness DF1175