30/ USER'S GUIDE① Wait, the light moves from number1 LED during lock, unlock or valetmode.② Number 1 LED will be on for 2seconds and off, number 2 led willbe on 2 seconds and off, and it willcontinuously move around to 0.③ Knock on the sensor once on your first digit of yourpassword, light will flash once more to confirm therecognition.④ Repeat the step 3 for your second, third and forth numberof your password.⑤ After your forth password, vehicle will lock (if it wasunlocked), or unlock (if it was locked).During Valet mode, doors can lock or unlock only.In case that the incorrect passwords are inputted more than 5times, Easy Door Lock will not be functional for 20 minutes.4-4 LED Display① During Arming: From (9) to (3), the 5 LEDs willsequentially flash five times left to right, and right to left(9-0-1-2-3-2-1-0-9-0). After that, LEDs will be on for 2seconds each from number 1 to 0, and you can enter yourpassword, while each LED is on for 2 seconds.② If alarm was triggered during the arming mode, LED willflash rapidly in sequence above after the siren duration.③ D uring the siren duration, all LED will flashsimultaneously④ During disarming: (0) Led will flash five times every 3seconds.⑤ During Valet mode: (0) Led flashes every 10 seconds.