User Manual for PC-80D Easy ECG Monitor198 System SetupOn the default menu screen, select “Setting” with Navigation Key, then press “”ok key button toenter into system setup screen, as shown in Figure 8-1.1.Press the navigation key “,,or”:Move the cursor upwards/backwards.2.Press“” ok key:Conform to option and enter into the corresponding parameter setting.3. Press the navigation key “,,or”:Adjust parameter values.4. Press“” ok key:Conform to option, if you do not want to adjust parameter values, or the setting isaccomplished,please enter the“ Back” button.8.1 Sound settingOn system setting screen, select “Volume” to enter into the sound setting screen, as shown in figure8-2.Beep: Setting the beeper and voice Open/Close. Move the slide icon to left means the beeper isdisabled; Move the slide icon to right means the beep is enabled.Speech: Adjust the volume with the navigation key. Move the slide icon to left means the speechvolume is minimal; Move the slide icon to right means the speech volume is maximal .8.2 Brightness SettingBrightness setting screen is shown in figure8-3. Adjust brightness with Navigation Key.8.3 Time/Date SettingDate and time setting screen is shown as figure 8-4.1. press navigation key“,,or”and “” ok key to select the date and time you need.2. press navigation key “,”to adjust the time value.3. Press “”ok key confirm the date and time setting value. If you do not want to adjust the parameter value or the setting is finished, please press the“ ” back button.Figure 8-1Figure 8-2Figure 8-3