Deluge Synthstrom Audible Instruction Manual
                                                             | |
● While holding these two buttons / pads on the Deluge, press the button or key on yourMIDI controller that you wish to assign to this function on the Deluge. The button / padthat you are holding on the Deluge should begin blinking pink to indicate that MIDIcontrol is assigned. (In the case of non-pad buttons, they are not capable of flashingpink, but see the next step to verify that MIDI control is correctly assigned to a givenbutton.)Now that MIDI control is assigned, anytime that you hold down the learn button, whateverbuttons or pads that MIDI control is assigned to will blink pink - or just blink their normal colour inthe case of non-pad buttons. To unassign MIDI control from a button or pad, just press it whileholding down the “MIDI learn” button.And, you can now use the button or key on your MIDI controller to enact whatever function youassigned it to on the Deluge.An individual sound within a kit track may be set to be played via a MIDI controller (e.g. akeyboard) by assigning an individual key or button on the MIDI controller to that sound (i.e.row)’s audition pad.Setting up a MIDI keyboard to play a synth track the way one would normally play a keyboard,i.e. with each key corresponding to a different note, is a similar process: while in track view forthe track, hold down the learn button, then hold down any audition pad, and then press any keyon the MIDI keyboard.This same process can be used on a CV track to cause incoming MIDI to control a CV / gateoutput, effectively turning the Deluge into a MIDI-to-CV/gate converter.Song-specific MIDI commands are saved along with the song. Global ones, once set, remainthe same no matter what song you are working on.MIDI controllers with knobs that send CC messages can also be set up to control synth andsound parameters in the Deluge. See here.Settings menuA number of settings are controllable from the settings menu, which is navigated in the sameway as the sound editor - refer to its chapter for instructions on menu navigation. To enter thesettings menu from track view, song view or keyboard view, hold down the shift button andpress down on the select knob.This is the structure of the settings menu and its submenus: |
This manual is suitable for:
manualsdatabase
Your AI-powered manual search engine