Demir Dokum HK 50 M Service Bulletin
                                                                                                                                                | |
Contents
| 
HK 50 M – HK 10M – HK 100S SERVICE BULLETINRemote controlRemote control; while following the connection to the device master card, observe the main systemparameters and make changes in the program. (Time programming, operating times for 3 circuits (hightemperature, low temperature and boiler), pump statuses, installation outputs etc.) Main characteristics of theremote control device;-Backlit 4x20 screen-Maximum room control unit installation distance can be 100 m.-Simple program and display-24 Vdc power demand-More sensitive than the room thermostatGeneral information about the remote control screenScreenshots are explained below. (Figure 8)The section displayed in gray in Figure 8 is the display screen. Display values are reached by using theand cursors. If system is entered, it increases and decreases parameter values.Press the OK key to enter the main menu and enter the changed parameter values into the system. If youwant to cancel the set value or return to the previous screen display, press the "Esc" key. If A type erroroccurs, the fan and slave cards will be reset if pressed for 5 seconds.Service Administration 119 03/2010 |
Related manuals for Demir Dokum HK 100M
manualsdatabase
Your AI-powered manual search engine