Denon ADV-M71 Operating Instructions Manual

Also see for ADV-M71: Specifications Specifications Operating instructions Service manual

Denon ADV-M71 Operating Instructions Manual Manual pdf 29 page image

29ENGLISHSpeaker2CH Virtual & SWSet the screen size and the speaker system.TV Aspect4:3 PSLINE-1 LINE-2 REC OUTMD TAPE ONFunction Setting Set the LINE-1 and LINE-2 function names and turn theanalog recording output (REC OUT) on or off.3STATUSRETURNANGLE AUDIO SUB TITLESETUP TONE /SDBENTERMUTINGDISPLAY MENU TOP MENUSURROUNDPARAMETERCH SELECT- +VCR CH76 -10 SETTING UP THE SYSTEM• Once all connections with other AV components have been completed as described in “CONNECTIONS” (see pages 8 to 15), make the varioussettings described below on the monitor screen using the ADV-M71’s on-screen display function.• Use the following buttons to set up the system:System setup items and default values (set upon shipment from the factory)SetupQuick set upSpeaker ConfigurationDelay TimeChannel LevelDVD auto power off settingDisc SetupOSD SetupVideo SetupAudio SetupRatingsOther SetupInput the combination of speakers in your system andtheir corresponding sizes (SMALL for regular speakers,LARGE for full-size, full-range) to automatically set thecomposition of the signals output from the speakers and thefrequency response.This parameter is for optimizing the timing with which theaudio signals are produced from the speakers and subwooferaccording to the listening position.At the listening position, listen to the test tones outputfrom the different speakers and set so that the playbacklevel from the different speakers is equal.The power automatically switches to standby if nooperation is performed for 30 minutes while in the stopmode with the function set to DVD.Set the audio language, subtitle language and disc menulanguage for when playing discs.Set the wallpaper for the setup and operation screens.Set the screen size and video system for the TV being used.Set the digital audio signal format and the linear PCMsampling frequency and bit conversion.Make the playback restriction setting for DVDs withrestricted viewing and set the password required forchanging the setting.Make the closed caption setting for DVDs. (A commerciallyavailable decoder is required to display the closed captions.)Default settingsFront Sp.SmallFront & Subwoofer Center“__”Surround“__”9ft (2.7m)Front L0 dBDialog Subtitle Disc MenuEnglishWall PaperTV Aspect4 : 3 PSDigital OutNormalRating LevelNo LimitBlueTV TypeNTSCLPCM SelectOFFPass Word Change0000 (Default)Closed CaptionOFFSlide Show5SECOFF Englishpower does not turn off automaticallyCenter“__”Front R0 dBSurround R“__”Surround L“__”Sub Woofer0 dBCenter Sp.“__”Surround Sp.“__”Sub WooferYesSw Freq. = 150 Hz / SW mode = NoneSystem SetupDVD Setup(1) System setup itemsSYSTEM SETUP buttonPress this to display the system setup menu.ENTER buttonPress this to switch the display.Also use this button to complete the setting.CURSOR buttons1 and 0:Use these to move the cursors (1 and 0) to the leftand right on the screen.• and ª: Use these to move the cursors (• and ª) to the upand down on the screen.Video ModeAUTOBlack levelLIGHTER