Denon ADV-M71 Operating Instructions Manual

Also see for ADV-M71: Specifications Operating instructions Specifications Service manual

Denon ADV-M71 Operating Instructions Manual Manual pdf 107 page image

107ENGLISH2 Making system connections between the ADV-M71 and the D-M31 series MD recorder (DMD-M31) or cassette deck (DRR-M31) makesoperation even easier. (For instructions on connections, refer to “Connecting to D-M31 Series System Components” on pages 8 to 9.)2 System functions will not work properly if the input/output function settings are not right for the connected components. Be sure to set theinput/output functions for the components being used. (See page 29.) The setting contents are maintained until they are next changed evenwhen the power is switched off.(1) Auto power on function• When the play/pause button on the main unit ( 1/3 ) or the DVD play button on the remote control unit ( 1 ) is pressed while the power is inthe standby mode, the ADV-M71’s power turns on automatically, and if a disc is loaded in the ADV-M71 the disc is played.BBANDPHONESVOLUMEON / STANDBYDVD SURROUND RECEIVER ADV-M71TONE / SDBFUNCTIONMENU/SET+-SURROUND / SELECTPUSH - PARAM.1-A / V3STATUSSETUP TONE /SDBFUNCTIONSURROUNDINPUT MODETEST TONEDVDCH0 /10CALLENTERMUTING+10SYSTEM MDCDR TAPETUNER TV / VCRVIRTUALDIRECT STEREOIN/SURR.IN/SURR.DVD982176+-11 When the ADV-M71 is in the standby mode, the power can beturned on simply by pressing the play/pause button on themain unit or the DVD play button on the remote control unit.If a disc is loaded, playback starts.The auto power on function also turns thepower on when the disc holder is openedwhile the ADV-M71 is in the standby mode.Main unit• To listen to a radio program, simply pressone of the tuner preset buttons (“+” or “–”)on the remote control unit. The power turnson and a station is tuned in.• The power on function works in the sameway when system connections are madewith the D-M31 series MD recorder (DMD-M31) or cassette deck (DRR-M31). Fordetails, refer to the respective component’soperating instructions.+-TUNERCHRemote control unit(2) Auto function selection• At the touch of a button, the function switches automatically to“DVD” and disc playback begins.BBANDPHONESVOLUMEON / STANDBYDVD SURROUND RECEIVER ADV-M71TONE / SDBFUNCTIONMENU/SET+-SURROUND / SELECTPUSH - PARAM.11• To listen to a radio program, simply pressone of the tuner preset buttons (“+” or “–”)on the remote control unit.• Auto function selection works in the sameway when system connections are madewith the D-M31 series MD recorder (DMD-M31) or cassette deck (DRR-M31). Fordetails, refer to the respective component’soperating instructions.• Auto function selection does not work for components connectedusing the AUX or D.AUX input/output terminals.+-TUNERCHRemote control unitMain unit Remote control unitDVD1-A / V3STATUSSETUP TONE /SDBFUNCTIONSURROUNDINPUT MODETEST TONEDVDCH0 /10CALLMUTING+10SYSTEM MDCDR TAPETUNER TV / VCRVIRTUALDIRECT STEREOIN/SURR.IN/SURR.DVD982176+-1Press the play/pause button on the ADV-M71 or the DVD playbutton on the remote control unit while a component thanthe D-M31 series (cassette deck or MD recorder) is playing.• Playback on theother componentstops, the ADV-M71’s functionswitches to“DVD” and if adisc is loadedplayback of thedisc starts.Main unit Remote control unitDVD120 SYSTEM FUNCTIONS