ENGLISH8ENGLISHTroubleshootingIf a problem should arise, first check the following.1. Are the connections correct?2. Have you operated the receiver according to the Operating Instructions?If this unit is not operating properly, check the items listed in the table below. Should the problem persist, there may be a malfunction.Disconnect the power immediately and contact your store of purchase.Measures PageCauseSymptomNo sound is produced.No image appears onthe monitor.• The iPod is not playing.• The iPod is not properly connected to the ASD-1R.• The AC adapter is not connected to the ASD-1R or apower outlet.• The AV/Control cable is not properly connected.• The monitor’s input selection is not properly set.• Check that the iPod is playing.• Check that the iPod is properly connected to the ASD-1R’sdock connector.• Check the connections.• Check the connections.• Set the monitor’s input selector to the proper position forthe connected video input terminal.–4, 54, 54, 5–Does not operateproperly when a deviceequipped with a dockcontrol terminal isconnected• The ASD-1R’s communications mode is not properly set. • Check that the communications mode is set to “DOCKCONTROL”. (Turn the power off when changing thesetting.)4Remote control unitdoes not operateproperly when a deviceequipped with aSYSTEM CONNECTORterminal is connected.• The ASD-1R’s communications mode is not properly set.• The communications mode is not suited for the AV/Controlcable connection.• The system remote control unit’s function selector is notproperly set.• You are using a cable other than the included systemcable.• Check that the communications mode is set to “TAPE” or“CD-R”. (Turn the power off when changing the setting.)• Set the communications mode to match the AV/Controlcable setting.• Match the communications mode and system remotecontrol unit function.• Use the included system cable.55, 666