Denon ASD-3N - Digital Player Docking Station Owner's Manual

Also see for ASD-3N - Digital Player Docking Station: Specifications Compabilities Guide Dimensions Errata Owner's manual

Contents

ENGLISHGetting Started Connections Playback Information TroubleshootingSubnet Mask :When connecting an xDSL modem or terminaladapter directly to the ASD-3N, input the subnetmask indicated in the documentation supplied byyour provider. Normally input 255.255.255.0.Default Gateway :When connected to a gateway (router), input itsIP address.Primary DNS Secondary DNS :If there is only one DNS address indicated in thedocumentation supplied by your provider, inputit at “Primary DNS”. If there are two or moreDNS addresses, input the first one at “SecondaryDNS”.r Use i to select “Exit” and press ENTER.Setup is complete.b When connecting to the network via a Proxyserver, select “Proxy” and press ENTER(vpage 12 “Proxy settings”).n Proxy settingsMake this setting when connecting to the Internetvia a proxy server.q On the GUI menu, select “Setup” – “Network”– “Network Setup” – “Detail” and press ENTER.w Use ui to set “Proxy” and press ENTER.e Use o p to set “Proxy” to “ON” and press i.The proxy server is enabled.r Use o p to select the proxy server input method,and then press i.w Select “Proxy”.r Selecting the input method.Example) Address[Selectable items]Address : Select when inputting by address.Name : Select when inputting by domainname.t Use ui p to input the proxy server address ordomain name and press ENTER.When “Address” is selected in step r :Input the address.When“Name” is selected in step r :Input the domain name.[Characters that can be input]A ~ Z a ~ z 0 ~ 9! “ # % & ’ ( ) * + , - . / : ; < = > ? @ [ \ ] (space)y Use uio p to input the proxy server portnumber and press ENTER.u Use i to select “Exit” and press ENTER.Setup is complete.s Network InformationDisplay network information.[Items to be checked]DHCP= ON or OFF IP Address MAC AddressSetupy Input the portnumber.t Input the address or domain name.u Select “Exit”.e Set “ON”.q Select “Detail”.