Denon AV SURROUND RECEIVER AVR-788 Owner's Manual

Also see for AVR 788 - AV Receiver: Specifications Specifications Datasheet Compatibility guide Setup guide

Denon AV SURROUND RECEIVER AVR-788 Owner's Manual Manual pdf 19 page image

Getting Started Connections Setup Playback Remote Control Multi-Zone Information TroubleshootingXMNOTEKeep the power cord unplugged until the XM Mini-Tuner and HomeDock connection have been completed.XM connector• The AVR-788 is an XM Ready® receiver. You can receive XM®Satellite Radio by connecting to the XM Mini-Tuner and Home Dock(includes home antenna, sold separately) and subscribing to the XMservice.• Plug the XM Mini-Tuner and Home Dock into the XM connector onthe rear panel.• Position the Home Dock antenna near a south-facing window toreceive the best signal.For details, see “Listening to XM Satellite Radio Programs” (vpage43, 44).When making connections, also refer to the operating instructions ofthe XM Mini-Tuner and Home Dock.XM Mini-Tuner and Home Dock• The XM name and related logo are registered trademarks of XMSatellite Radio Inc. All rights reserved.• XM Ready is a registered trademark of XM Satellite Radio Inc. Allrights reserved.Antenna terminalsAn F-type FM antenna cable plug can be connected directly.Direction of broadcasting stationAM loop antenna(supplied)FM antenna75 Ω/ohmsCoaxial cableFM indoor antenna(supplied)GroundAM outdoor antennaAM loop antenna assemblyRemove the vinyl tie and takeout the connection line.Connect to the AMantenna terminals.Bend in the reverse direction.a. With the antenna on top ofany stable surface.Mountb. With the antenna attachedto a wall.Installation hole Mount on wall, etc.Note to CATV system installer:This reminder is provided to call the CATV systeminstaller’s attention to Article 820-40 of the NECwhich provides guidelines for proper grounding and,in particular, specifies that the cable ground shall beconnected to the grounding system of the building,as close to the point of cable entry as practical.Connection of AM antennas1. Push thelever.2. Insert theconductor.3. Return thelever.NOTE• Do not connect two FM antennas simultaneously.• Even if an external AM antenna is used, do notdisconnect the AM loop antenna.• Make sure the AM loop antenna lead terminals do nottouch metal parts of the panel.ENGLISH