o Connecting the speaker cablesCarefully check the left (L) and right (R) channels and + (red) and –(black) polarities on the speakers being connected to this unit, and besure to connect the channels and polarities correctly.1 Peel off about 10 mm of sheathing from the tip of thespeaker cable, then either twist the core wire tightly orterminate it. .2 Turn the speaker terminal counterclockwise to loosen it. .3 Insert the speaker cable’s core wire to the hilt into thespeaker terminal. .4 Turn the speaker terminal clockwise to tighten it. .o Connecting the subwooferUse a subwoofer cable to connect the subwoofer. Two subwoofers canbe connected to this unit.To use two subwoofers, set “Subwoofer” to “2 spkrs” in the “SpeakerConfig.” setting. (v p. 224)The level and distance can be set separately for Subwoofer 1 andSubwoofer 2. .1 CBL/SATPHONO2 DVD1 CBL/SAT 2 CD1 TVAUDIO6 CD2 DVD1 23 Blu-ray5 MEDIA PLAYER4 GAMERS-232C7.1CH INREMOTE CONTROLTRIGGER OUTPRE OUTCOAXIAL OPTICALSTRAIGHT CABLEIRDC12V 150mA MAX.ZONE2 ZONE3FRONTFRONTSURROUND CENTER SUBWOOFERSURROUND BACK CENTERSURROUND BACKSURROUNDHEIGHT2 HEIGHT4/FRONT WIDE1AUDIO (ASSIGNABLE)AUDIO DIGITAL AUDIO (ASSIGNABLE)2ASSIGNABLE ASSIGNABLEASSIGNABLE ASSIGNABLEASSIGNABLESPEAKERSSUBWOOFERHEIGHT1 HEIGHT3FRONTHEIGHT4/FRONT WIDEHEIGHT3 HEIGHT3FRONT CENTER SURROUND SURROUND SURROUND BACK SURROUND BACK HEIGHT1 HEIGHT1 HEIGHT2 HEIGHT2HEIGHT4/FRONT WIDESW1 SW2Contents Connections Playback Settings Tips Appendix43Front panel Display Rear panel Remote Index
