Denon AVP-A1HD Owner's Manual

Also see for AVC-A1HD: Service manual Owner's manual Owner's manual

Contents

Denon AVP-A1HD Owner's Manual Manual pdf 7 page image

Setup Other Operations Multi-Zone Information Troubleshooting SpecificationsGetting Started Connectionsq HDMI video direct button (NGT)When this button is pressed, video signalsrecorded on the BD or DVD are output directly.Video signals input from the HDMI IN terminalare output directly from the HDMI OUT terminalwithout being processed by this unit.n Main remote control unit (RC-1067)Remote Control UnitNOTEWhen using 3D video devices that transmit radiocommunication signals (such as infrared signals etc)between the various units (such as the monitor, 3Dglasses, 3D transmitter unit etc), the remote controlunit may not operate due to interference from thoseradio communication signals. If this occurs, adjustthe direction and distance of the 3D communicationfor each unit, and check that the remote control unitoperation is not affected by these signals.qWhen this unit is upgraded, the night mode cannot be set when the NGTbutton is pressed.ConnectionsSpeaker InstallationSpeaker LayoutWhen this unit is upgraded, the speaker configurations supported by thisunit change.The table below shows a typical speaker configuration for the unit.SpeakerConfigurationFRONT CENTER SURROUND SURROUND BACK FRONTHEIGHTFRONTWIDE SUBWOOFER(b2)L R L R L R 1 only L R L R9.1-channels (b1) S S S S S S S – S S – – S– – S S7.1-channels S S S S SS S–– – – – S– – S S– – S S6.1-channels S S S S S – – S – – – – S5.1-channels S S S S S – – – – – – – S3.1-channels S S S – – – – – – – – – S2.1-channels S S – – – – – – – – – – S2-channels S S – – – – – – – – – – –b1 To perform the 9.1 channel playback using front height speakers or front wide speakers, a separatepower amplifier (sold separately) is required.b2 The unit can be connected to a maximum of 3 subwoofers.When the video direct function is on, temporarydisplay in the GUI menu cannot be used.