Denon AVP-A1HDE Owner's Manual

Contents

Denon AVP-A1HDE Owner's Manual Manual pdf 18 page image

Getting Started Setup Playback Remote Control Multi-Zone Information TroubleshootingRecord Player• When connecting a record player with an MC cartridge, use acommercially available MC head amplifier or a step-up transformer.• Induction humming (a booming sound) may be produced from thespeakers if the volume is raised with no record player connected.• With some record players, noise may be generated when the groundwire is connected. If so, disconnect the ground wire.(/%"6%*0065RLTurntable (MM cartridge)NOTEThe AVP-A1HD’s SIGNAL GND terminal is meant to reduce noise whena record player is connected. This is not a safety ground terminal.RLRL"6%*0"6%*0 $0"9*"-0653-3-0659-3065CD PlayerConnect the cables to be used.CD playeriPod®Example :R LR L"4%3iPod• When using an optical cable or a BNC cable for the digital audioconnection, make the settings at GUI menu “Source Select” – “CD”– “Assign” – “Digital” (vpage 46).• The default analog audio input setting is “RCA”. When using a balancedcable for the analog audio connection, make the settings at GUI menu“Source Select” – “CD” – “Assign” – “Analog” (vpage 46).• With the default settings, the iPod can be used connected to the VCR(iPod) connector.• To assign the iPod to a connector other than VCR (iPod), make thesettings at GUI menu “Source Select” – “(input source to which iPoddock assigned)” – “Assign” – “iPod dock” (vpage 46).Use a DENON Control Dock for iPod (ASD-1R, sold separately) toconnect the iPod to the AVP-A1HD. For instructions on the ControlDock for iPod settings, refer to the Control Dock for iPod’s operatinginstructions.ConnectionsNOTEThe default AVP-A1HD balance model XLR input connectors pinalignment is as shown.q : GROUNDw : HOTe : COLD