Denon AVR-1306 Operating Instructions Manual

Also see for AVR-1306: Operating instructions

Contents

ENGLISH29Basic Operation Basic OperationENGLISHRecalling preset stations1 Watching the display, press the SHIFT button toselect the preset memory block.2 Watching the display, press the PRESET • (+)or ªª (–) button to select the desired presetchannel.Preset stations1 Use the “Auto tuning” or “Manual tuning”operation to tune in the station to be preset inthe memory.3 Press the SHIFT button and select the desiredmemory block (A to G).2 Press the MEMORY button.4 Press the PRESET (+) or (–) button to select thedesired preset channel (1 to 8).• To preset other channels, repeat steps 1 to 4.A total of 56 broadcast stations can be preset — 8 stations(channels 1 to 8) in each of blocks A to G.5 Press the MEMORY button again.• Store the station in the preset memory.RDS (Radio Data System)RDS (works only on the FM band) is a broadcasting service whichallows a station to send additional information along with theregular radio program signal.The following three types of RDS information can be receivedwith this unit:2 Program Type (PTY)PTY identifies the type of RDS program.The program types and their displays are as follows:NEWSAFFAIRSINFOSPORTEDUCATEDRAMACULTURESCIENCEVARIEDPOP MROCK MEASY MLIGHT MCLASSICSOTHER MWEATHERFINANCECHILDRENSOCIALRELIGIONPHONE INTRAVELLEISUREJAZZCOUNTRYNATION MOLDIESFOLK MDOCUMENT2 Traffic Program (TP)TP identifies programs that carry traffic announcements.This allows you to easily find out the latest traffic conditions inyour area before leaving home.2 Radio Text (RT)RT allows RDS stations to send text messages that appear onthe display.NewsCurrent AffairsInformationSportsEducationDramaCultureScienceVariedPop MusicRock MusicEasy ListeningMusicLight ClassicalSerious ClassicalOther MusicNOTE:The operations described below using the RDS, PTY and RTbuttons will not function in areas in which there are no RDSbroadcasts.WeatherFinanceChildren’sprogramsSocial AffairsReligionPhone InTravelLeisureJazz MusicCountry MusicNational MusicOldies MusicFolk MusicDocumentariesManual tuning1 Set the input source to “TUNER”.3 Press the MODE button to set the manual tuningmode.Check that the display’s “AUTO” indicator turns off.2 Watching the display, press the BAND button toselect the desired band (AM or FM).4 Press the TUNING (+) or (–) button to tune inthe desired station.The frequency changes continuously when the button isheld in.• When the manual tuning mode is set, FM stereo broadcasts arereceived in monaural and the “STEREO” indicator turns off.TUNINGSHIFT RDS RTBANDINPUT SELECTOR PRESET PTYTUNINGBANDSHIFTTUNERMODEMEMORYPRESET