Denon AVR-1312 Owner's Manual

Also see for AVR-1312: Brochure & specs Getting started Brochure Getting started Service manual

Contents

Denon AVR-1312 Owner's Manual Manual pdf 32 page image

29Convenient functionsSleep timer functionThe power automatically goes into standby once the set time haselapsed.This is convenient for playing sources while going to sleep.Press SLEEP and display the time youwant to set.The “SLEEP” indicator on the display lights.• The time switches as shown below eachtime SLEEP is pressed.OFF 10 min 20 30 40 506080 7090100110120To cancel the sleep timerPress SLEEP to set “OFF”.The “SLEEP” indicator on the display turns off.• If you do not press any button for approximately 5 seconds, themenu screen light turns off.• The sleep timer setting is canceled if this unit’s power is set tostandby or turned off.Quick select functionAll of the settings in step 1 can be memorized together. By memorizingfrequently used settings, you can quickly access and enjoy a playbackenvironment that is consistently the same.n Saving the settings1 Set the items below to the settingsyou want to save.q Input source (vpage 11)w Volume (vpage 11)e Surround mode (vpage 21)r Video Select (vpage 34)2 Press and hold the desired QUICK SELECT until“Memory” appears on the display.The current settings will be memorized.GQuick select defaultsHInput source VolumeQUICK SELECT 1 BD –40 dBQUICK SELECT 2 SAT/CBL –40 dBQUICK SELECT 3 GAME –40 dBQUICK SELECT 4 DOCK –40 dBn Recalling the settingsPress QUICK SELECT at which thesettings you want to call out are saved.If QUICK SELECT on the main unit is pressed, the same function aswith the remote control unit can be obtained.Various memory functionsn Personal memory plus functionThis function sets the settings (input mode, surround mode, HDMIoutput mode, audio delay etc.) last selected for the individual inputsources.The surround parameters, tone settings and the volumes of thedifferent speakers are stored for the individual surround modes.n Last function memoryThis function stores the settings which were made before goinginto the standby mode.When the power is turned back on, the settings are restored.