Denon AVR-1403 Operating Instructions Manual

Also see for AVR-1403: Operating instructions Product sheet Service manual Owner's manual

Denon AVR-1403 Operating Instructions Manual Manual pdf 17 page image

17ENGLISHBefore setting up the system12 Press the SYSTEM button to enter the setting.Check that all the components are correct, then press the POWER operation switch on the main unit orthe POWER button on the remote control unit to turn on the power.3 Press the SELECT or (down) button to switch to the speaker configuration set up.*SYSTEM SET UPNOTE:Press the SYSTEM button again to finish system set up. System set up can be finished at any time. The changes to the settings made up tothat point are entered.NOTE: Please make sure the “AUDIO” position of the slide switch on the remote control unit.(Main unit) (Remote control unit)Setting the speaker configuration1 Use the (left) and (right) buttons to select your front speaker type.1 FRONT LARGE LARGE SMALL(left) button (right) buttonPress the SELECT or (down) button to switch to the center speaker setting.2 Use the (left) and (right) buttons to select your center speaker type.2 CENTER SMALL LARGE SMALL NONE(left) button (right) buttonPress the SELECT or (down) button to switch to the surround speaker setting.3 Use the (left) and (right) buttons to select your surround speaker type.3 SURR. SMALL LARGE SMALL NONE(left) button (right) buttonPress the SELECT or (down) button to switch to the subwoofer setting.NOTE:• When “Small” has been selected for the front speakers, “Large” cannot be selected for the center speaker.(Initial)(Initial)(Initial)