Denon AVR-1506 Operating Instructions Manual

Also see for AVR-1506: Brochure & specs Operating instructions Service manual

System SetupENGLISHENGLISH12Use System Setup to customize a variety of settings to suit your listening environment.For the contents of a system menu and the initial setting of this unit ( page 17).• You can change the settings using the buttons on the remote control unit.• The AVR-1506 is equipped with an alpha numeric front panel display that can also be used to check and adjust settings. Somerepresentative front display examples are shown below.CURSORMODE 1SETUPENTERFront displaySystem SetupNo.* T E S T T O N E Y e s <Press the CURSOR FF button to execute.Currently selected line* C O A X 1 C DCurrent settingCurrently selected line1 Set the MODE 1 switch to “AUDIO”.2 Press the SETUP button to enter the setting.4 Press the ENTER or CURSOR HH button to confirmthe new settings.* S y s t e m S e t u p3 Press the ENTER or CURSOR HH button to selectthe setting, then press the CURSOR FF or GGbutton to select the parameter.* F r o n t L a r g eLarge Small* C e n t e r S m a l lLarge Small None5 Press the SETUP button to finish system set up.[ Display ]Setting the Speaker Configuration1 Press the CURSOR FF or GG button to select yourfront speaker type, then press the ENTER orCURSOR HH button to switch to the center speakersetting.* F r o n t L a r g eLarge Small2 Press the CURSOR FF or GG button to select yourcenter speaker type, then press the ENTER orCURSOR HH button to switch to the surroundspeaker setting.* C e n t e r S m a l lLarge Small NoneWhen “Small” has been selected for the front speakers,“Large” cannot be selected for the center speaker.3 Press the CURSOR FF or GG button to select yoursurround speaker type, then press the ENTER orCURSOR HH button to switch to the surroundback speaker setting.* S u r r . S m a l lLarge Small NoneWhen “Small” has been selected for the front speakers,“Large” cannot be selected for the surround speakers.The composition of the signals output to each channel and thefrequency response are adjusted automatically according to thecombination of speakers actually being used.