5ENGLISH FRANÇAIS ESPAÑOL PORTUGUÊS ESPAÑOL NEDERLANDS SVENSKA5ENGLISH DEUTSCH FRANÇAIS ITALIANO ESPAÑOL NEDERLANDS SVENSKAFor optimum surround playback, adjustment of the distance of speakers andsound level of each channel, using the test tone, are required, depending on theenvironment for speakers to be used.The settings for the following 5 items should be made:Crossover Freq.Channel LevelDistanceBass SettingSpeaker Config.Select speaker configuration and size (bassreproduction capability).Set subwoofer and LFE signal range playback.Set distance from listening position to speakers.Measure beforehand the distance from thelistening position to each speaker.Set the volume of the test tone to be the samewhen it is output from each speaker.Set the maximum frequency of the bass signaloutput from each channel to the subwoofer.Set the Crossover Frequency to suit the bassreproduction capability of the speaker being used.Menu operation1 Press SETUP.The menu is displayed on the TV screen ofthis unit.Speaker SetupInput SetupOption SetupSpeaker Config.Bass SettingDistanceChannel LevelCrossover Freq.SETUP MENUEnter ReturnENTER BACK2 Press ENTER.VOLUMEINFO AUDIOBACK SETUPENTER3 Use ui to select the menu to be setor operated, and then press ENTER.4 Use o p to select a detailed setting,and then press ENTER.• To return to the previous item, press BACK.• Exiting the Menu, press SETUP while the menuis displayed.The menu display disappears.Set up speakersSpeaker Confi g. Default settings are underlined.1 Press SETUP.The menu is displayed on the TV screen ofthis unit.Speaker SetupInput SetupOption SetupSpeaker Config.Bass SettingDistanceChannel LevelCrossover Freq.SETUP MENU2 Use ui to select “Speaker Setup”,and then press ENTER.Speaker Config.Bass SettingDistanceChannel LevelCrossover Freq.FrontCenterSurroundSubwooferSpeaker Setup3 Use ui to select “Speaker Config.”,and then press ENTER.1 Speaker Config.FrontCenterSurroundSubwooferSmallSmallSmallYesNOTEDo not use the outward shape of the speakerto determine selection of a “Large” or “Small”speaker. Instead, use the frequencies set in“Crossover Freq.” (vpage 8) as the standardfor determining bass reproduction capability.4 Use ui to select a speaker, and useo p to select a detailed setting.Items to be set are shown below.Front Set the front speaker size.• Large : Use a large speaker that can adequatelyplay back low frequencies.• Small : Use a small speaker that has inadequateplayback capacity for low frequencies.• When “Subwoofer” is set to “No”, “Front” isautomatically set to “Large”.• When “Front” is set to “Small”, “Center”,“Surround“ and “Surround Back” can not beset to “Large”.Center Set the presence and size of thecenter speaker.• Large : Use a large speaker that can adequatelyplay back low frequencies.• Small : Use a small speaker that has inadequateplayback capacity for low frequencies.• None : Select when a center speaker is notconnected.“Large” is not displayed when “Front” is setto “Small”.Surround Set the presence and size of thesurround speakers.• Large : Use a large speaker that can adequatelyplay back low frequencies.• Small : Use a small speaker that has inadequateplayback capacity for low frequencies.• None : Select when the surround speakers arenot connected.