4ENGliSh DEutSch FrANçAiS itAliANo ESpAñol NEDErlANDS SVENSKA РУССКИЙ POLSKI TÜRKÇEWhen preparations are complete, start the Setup Wizard.Use the Setup Wizard to perform connections and settings as shown in the following steps. Perform the operations as described in theinstructions on the screen. You can skip or cancel at each section if necessary.Setup WizardThis completes the Setup Wizard.Remote Setup [1/3]Blu-rayCABLECABLE/PVRCDCD RecorderDVDPlease select thedevice you want tocontrol.Remote SetupConfigure the settings so that devicesconnected to this unit can be operatedusing the provided remote control.These settings can be changed in the following menu even after setting the Setup Wizard(vm page 66 “Remote Setup Guide”).5Source Setup [1/2]BDDVDTVSAT/CBLGAMEV.AUXPlease select device.Source SetupSet the connecting terminals for eachdevice to be set, and connect to theterminals.These settings can be changed in the following menu even after setting the Setup Wizard(vm page 70 “Input Assign”).4Speaker Calibration Detect & Measure (Main)Please connectmicrophone.MultEQSpeaker CalibrationMeasureConfigure the settings for your speakers,and for the optimum surround sound foryour room.These settings can be changed in the following menu even after setting the Setup Wizard(vm page 11 “Set up speakers (Audyssey® Auto Setup)”).3Speaker Connection Please select thespeaker configurationto be used.5.1chOthers5.1ch is the mostpopular surroundsystem.Speaker ConnectionConnect the speakers for surround sound.NOTEConnections for speakers other than 5.1 channelspeakers cannot be set using the Setup Wizard.Select “Others”, and then select “Skip” in “2. Speaker Connection” to proceed to “3. SpeakerCalibration”. (For details on the setting method, see m page 36 “Speaker installation/connection(Advanced connection)”.)2Language Select EnglishDeutschFrançaisPlease select thelanguage for the onscreen menu.Language SelectSet the language for the instructions onthe television screen.These settings can be changed in the following menu even after setting the Setup Wizard(vm page 67 “Language”).NOTE If your language is not available, select “English”.1